• State Answer Suggested
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 278 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMP8646: ST alternative

Lillian Liu(SH)
Expert 4620 points
Part Number: LMP8646
Other Parts Discussed in Thread: TIOL112, TIOL221,

Tool/software:

Hi team，

We have request for Analog Digital Terminati for this project. Do you have similar part to recommend? Current my customer use ST : PCLT2A74.

Thanks

Lillian 

  • 0
    Guru 318660 points

    You probably want an IO-Link transceiver like the TIOL112 or TIOL221: ti.com/interface/io-link-digital-ios/products.html

  • 0
    TI__Mastermind 23625 points

    Lillian, 

    Thanks for using E2E!

    I had a look and I cannot find a part with this part number. I did find the PCLT-2AT4, which is a digital terminator as you call out above. I agree with Clemens that the IO-Link Transceiver products will probably be a better fit here. The LMP8646 has current limiting features, but this is only a small sub-block in this mixed technology device. I am going to transfer this thread to the appropriate team to get their thoughts on a potential part here. 

  • 0 in reply to Carolus Andrews
    TI__Mastermind 34410 points

    Hi Lillian,

    The TIOL IO-Link transceivers are not equivalent to the PCLT devices and there are many differences.  One of these differences is with the current limit range.  I see the PCLT datasheet range of approximately 3 to 7.5mA.  The TIOL devices have current limit range that is typically between 50 to 300mA.

    Please review the TIOL112 or TIOL221 datasheets to see if the features are even remotely close to the needs of the customer.

    Regards,

    Jonathan