• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 148 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TL081H: Cost effective voltage follower opamp

TL081H: Pin name different

Brian Chan
Expert 5910 points
Part Number: TL081H

Tool/software:

Hi Team

my customer find below IC pin name is different. could you help me check which one is correct? and do you have any plan to fix datasheet?

BRs

Brian

  • 0
    TI__Guru 55466 points

    HI Brian,

    As shown on the TL081H data sheet, on the SOT23-5 package (DBV), pin 2 is the negative supply (V- or VCC-) and pin 5 is the positive supply (V+ or VCC+). 

    Different application notes, diagrams and/or technical literature may use the term V- or VCC- and V+ or VCC+ interchangeably, but the pin out functionality and pinout is consistent.

    Regards,

    Luis