• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 49 subscribers
  • Views 663 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLC071CP

Elaine Almeida
Prodigy 10 points
Other Parts Discussed in Thread: TLC071

Hello,

I designed a filter using TLC071 because it is supposed to work  with a single power supply , but the op amp just works when connected to two power supply. Is there anything I am missing?

Thanks

 

  • 0
    TI__Guru* 93105 points

    Elaine,

    Make sure that you are operating the TLC071 within the specified input and output operating ranges; VICR, VOH, VOL, etc. Also, be sure that if you are using a PowerPad package that the power pad is connected to the same potential as the GND pin.

    Regards, Thomas

    PA - Linear Applications Engineering