TLC272 replacement

Giorgos Nikolaidis

Prodigy 20 points

Other Parts Discussed in Thread: TLC272, OPA348, OPA2348

hi,

i am new here!

i am using a tlc272. the VDD is 5V and the VOH (High-level output voltage) is 3.8V.

we need to replace the TLC272 with an other amplifier to have VOH around 4.5V

it is a simple project with no special requarments.

over 11 years ago

0 Bruce Trump over 11 years ago

Guru 21975 points

Giorgos,

You could consider the OPA348 family (dual is OPA2348). Output high is specified as 125mV from the rail. So for a 5k load and 5V supply, output high is 4.875V, minimum.

Regards, Bruce

0 Giorgos Nikolaidis over 11 years ago in reply to Bruce Trump

Prodigy 20 points

thank you Bruce,

yes, that's technically possible but not acceptable in economics! the opa series has price 5 times up!

we are searching a soloution near the 0.5euros. any other ideas?

0 Keith Spence over 11 years ago

TI__Prodigy 90 points

Hello Giorgos, please e-mail me direct regarding device pricing spence@ti.com

I think the OPA2348 is still a good solution.

Regards,

Keith

Amplifiers

Amplifiers forum

TLC272 replacement