I want to develop a 2 electrode potentiostat for some chemical sensing(change in potential on electrode surface). which analog IC and/evaluation board should i start with?? after checking the site lm91200 seems the one. any advice???
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I want to develop a 2 electrode potentiostat for some chemical sensing(change in potential on electrode surface). which analog IC and/evaluation board should i start with?? after checking the site lm91200 seems the one. any advice???
Neuro11,
Yes for a 2 electrode pH chemical sensing application it would be the LMP91200 and LMP91200EVAL board.
But you mention "potentiostat" so if it is a 2 electrode potentiostat gas sensing application I recommend looking at the LMP91000 and the LMP91000EVM board. The datasheet describes how to connect the device in the 2-lead (galvanic cell) configuration.