OPA2677 IBIS model

Lighting

Other Parts Discussed in Thread: OPA2677, DXP

Hi everyone,

I need OPA2677 IBIS model for doing the Signal Integrity Analysis. I couldn't find the IBIS model in the TI website. Could you please design IBIS model for this part?

over 9 years ago

0 Samir Cherian over 9 years ago

TI__Genius 12631 points

Hello,
I can put in a request to the modelling team to create the IBIS model for the product. Can you please let me know a few things:
1. What simulator do you plan on using the model with?
2. What company and end-equipment is this being used in?
3. What is the approximate volume that you plan on using?
This could take around 2 weeks minimum to generate the model.-Samir

0 Lighting over 9 years ago in reply to Samir Cherian

Prodigy 30 points

Hi Samir
I'm an undergraduate from Hunan University(China).I and my classmates attempt to design a Signal & Waveform generator for experiments.Up till now,we have stepped to the simulation part.We assume that we won't use Amplifier by large amount.The simulator we use is Altium Designer(DXP).
Maybe I am not quite accurate in English expression.Let me know if you have any confusion.
Call me as soon as you accomplish the model.
Thanks for your help.

0 Samir Cherian over 9 years ago in reply to Lighting

TI__Genius 12631 points

Hello,
I will put in the request for the model, however the modeling team is fairly backed up so am unsure how long the request will take to process.

0 Lighting over 9 years ago in reply to Samir Cherian

Prodigy 30 points

Thank you,we will wait for it.

0 Samir Cherian over 9 years ago in reply to Lighting

TI__Genius 12631 points

Hello, The modling team let me know that since there is no digital IO on the OPA2677, it is not suitable for an IBIS model. Please use the TINA or PSICE model that is already available.
Thanks,

Amplifiers

Amplifiers forum

OPA2677 IBIS model