Other Parts Discussed in Thread: TINA-TI
Tool/software: TINA-TI or Spice Models
Hello,
I have schematic as follows: OpAmp_NF_estimation.TSC
Is it correct way to estimate NF of the diff-to-single Op-Amp circuit?
Thank you!
tsa
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: TINA-TI or Spice Models
Hello,
I have schematic as follows: OpAmp_NF_estimation.TSC
Is it correct way to estimate NF of the diff-to-single Op-Amp circuit?
Thank you!
tsa
Hi Tsa,
Taking the difference between the input SNR and the output SNR is one way of estimating Noise Figure of the Diff-to-single op-amp circuit.
Best Regards,
Rohit