INA283-Q1: VSENSE to VOUT Step Response

Hiroshi Doi35

Part Number: INA283-Q1

Hi All,

Spec sheet P10 Figure 21. to 26. shows Common-Mode Step Response.
I need VSENSE =<Differential (V+IN) – (V–IN)> to VOUT Step Response.

Same as Common?

If not, let me know about VSENSE Resonse time.

over 6 years ago

0 Mitch M over 6 years ago

TI__Genius 17990 points

Hello Doi-san,

The plots that you are looking for are Figures 27 to 30 on P11. These are output referred plots, which means that these are the responses on the output for any gain and VSENSE step combination that would produce the specified voltage on the output.

Amplifiers

Amplifiers forum

INA283-Q1: VSENSE to VOUT Step Response