• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 643 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA148-Q1: to set the tolerance for offset and Gain on pspice model

Paul Kim
Intellectual 1430 points
Part Number: INA148-Q1

Hi Team

my customer downloaded INA148-Q1 pspice model from TI.com.

he want to set the tolerance for offset and Gain,

but he said there is no feature to set the tolerance for offset and Gain by user.

may I get lib file for him to freely set the tolerance for offset and Gain ?

  • 0
    TI__Mastermind 27715 points

    Hello,

    Unfortunately our models do not support adjusting the tolerance of parameters. Instead, the models are built to the typical specifications of a device at room temperature, which provides a very useful starting point for evaluation and design. Any error analysis over parametric distribution, temperature, or other application-specific variables is the responsibility of the end product designer.

    Best regards,

    Ian Williams
    Applications Engineer
    Precision Amplifiers