THS4521: THS4521 about delay time

Mickey Zhang

Genius 12080 points

Part Number: THS4521
Other Parts Discussed in Thread: THS4524, THS4522, , TINA-TI, LMH6554, LMH6552

Hi team,

The customer would like to use THS4521,THS4522 and THS4524. He needs to know the delay time of these devices that is the time for the signal

from input to output. Would you please support this case?

Best Wishes,
Mickey Zhang
Asia Customer Support Center
Texas Instruments

over 8 years ago

0 Rohit Bhat over 8 years ago

TI__Genius 15975 points

Hi Mickey,

Since the THS452x devices are mainly suited for applications < 10MHz, the delay time for the signal from input to output would be very minimal. Or basically, the output should instantaneously track the input. You might be able to simulate this in TINA-TI for the customer's gain configuration.

Best Regards,
Rohit

0 Mickey Zhang over 8 years ago in reply to Rohit Bhat

TI__Genius 12080 points

Hi Rohit,

Thanks for your support.

But the bandwidth is 145 MHZ.

How to simulate for TINA? Would you provide an example of TINA?

0 Rohit Bhat over 7 years ago in reply to Mickey Zhang

TI__Genius 15975 points

Hi Mickey,

Even though the small signal bandwidth of the part is 145MHz, the usable bandwidth is limited up to 10MHz due to linearity performance.
Is the customer looking to use the THS452x families at 145 MHz signals? If that's the case, I would instead recommend using LMH6552 or LMH6554 which are higher speed parts.

I looked in TINA-TI and really don't think it could be used for simulating the delay.

Best Regards,
Rohit

0 Mickey Zhang over 7 years ago in reply to Rohit Bhat

TI__Genius 12080 points

Hi ROhit,

OK. Thanks for your support.

The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

Amplifiers

Amplifiers forum

THS4521: THS4521 about delay time