• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 684 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA132: Thermal metrics for OPA132

Chris Kimble
Intellectual 270 points
Part Number: OPA132
Other Parts Discussed in Thread: OPA827, OPA134

The OPA132 datasheet has no thermal resistance specs.   Do you think the thermal resistance specs for any old SOIC-8 op amp would be reasonably close?   Thanks...

  • 0
    TI__Guru* 93105 points

    Hi Chris,

    I might be able to put you a little closer to some thermal numbers than those of just any old SOIC. I searched for another JFET input operational amplifier, having similar operating current to the OPA132. The OPA827 is similar in those regards, and I would expect their package thermal metrics to be similar as well.  

    See Sec. 6.4, on page 5, of the OPA827 datasheet for the thermal numbers:

    Regards, Thomas

    Precision Amplifiers Applications Engineering

  • 0 in reply to Thomas Kuehl
    TI__Guru* 93105 points

    Hi Chris,

    I think we get even closer in terms of the OPA132 thermal metrics. We recently measured them for the OPA134 audio op amp and found its numbers. Please see the table shown below.

    Regards, Thomas

    Precision Amplifiers Applications Engineering