• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 792 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA194A-Q1: On the minimum value of slew rate

Koji Hayashi92
Mastermind 7010 points
Part Number: INA194A-Q1

Hi All,

My customer has a question about slew rate.

The dataSheet has a TYP value of 1 V/us.

However, there is no description of the minimum value.

What is the minimum value?

Best Regards,
Koji Hayashi

  • 0
    TI__Mastermind 32395 points
    Hello Koji,

    We do not perform maximum and minimum testing for slew rate of the INA194-Q1 and we cannot say what the minimum value is. Practically, you could make a conservative assumption of +/-30% lot-to-lot variation. This would mean a 0.7V/us minimum slew rate under the same testing condition in datasheet; however, TI is not liable to this assumption since we do not specify any lot-to-lot variation nor the minimum and maxium slew rates.

    Peter Iliya
    Current Sensing Applications