This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA126: single power supply problems

Part Number: INA126

Hi. I am having problems to use INA126 with load cell. My configuration is: Input common mode Voltage = 2.5V. Power Supply = 5V/0V. Vref = 0V. I would like to know the limits of Output Voltage I will have.

For example, on the picture below, I know that if I were using Vref = 2.5V it would be between 0.6V - 4.3V.

Thanks for any input about that.