• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 1014 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DUAL-DIYAMP-EVM design frequency range

James Wei
Prodigy 10 points

Other Parts Discussed in Thread: DUAL-DIYAMP-EVM, OPA657

Hi

I would like to know what is the maximum design frequency DUAL-DIYAMP-EVM's PCB board can support up to. For example, if I want to use OPA657 (1.6GHz Opamp) to build an non-inverting amplifier, what would be the achievable bandwidth. Thank you.

  • 0
    TI__Expert 8720 points
    Hi,

    I would not suggest using the DUAL-DIYAMP-EVM for high speed designs. The board was not design with high speed parasitic considerations and can cause oscillations in high speed amplifiers. I would suggest using the OPA657 EVM for any designs.

    Regards,