INA317: Evaluation board for the INA317

Donny McCoy

Part Number: INA317
Other Parts Discussed in Thread: INA333

We are looking to implement the INA317 instrument amplifier. Is there an evaluation board to help in this implementation? Also, are there any examples to complete a tina simulation?

over 6 years ago

0 kai klaas69 over 6 years ago

Guru 140200 points

Hi Donny,

do you have any concrete questions?

Kai

0 Dennis Goeke over 6 years ago in reply to kai klaas69

TI__Genius 11135 points

Donny
We do have an EVM that should work with this part. You can order it here:
www.ti.com/.../inaevm-msop8
The INA317 is relatively new and doesn't have spice models or reference designs done yet, however the INA333 is very similar in function and you can use the TINA Models for it to develop your design. You can find those here:
www.ti.com/.../toolssoftware
You might also find our Vcm vs Vout Calculator useful. Its under software on the INA333 tool page linked above.

0 Dennis Goeke over 6 years ago

TI__Genius 11135 points

Donny

We haven't heard back from you so we assume the links below resolved your issue. If not, just post a reply below or create a new thread if this one times out.

Thanks
Dennis

Amplifiers

Amplifiers forum

INA317: Evaluation board for the INA317