• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 47 subscribers
  • Views 671 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

0804MC: Vacuum compatibility

Girish Rughoobur
Prodigy 20 points
Part Number: 0804MC

I would like to ask if the 0804MC is compatible in vacuum environment. If not, are there any alteratives?

  • 0
    TI__Genius 11135 points
    Girish
    I'm unclear on what you're asking. In what way would this be used in a vacuum environment? Would it have to provide some sort of seal?

    Dennis
  • 0 in reply to Dennis Goeke
    Prodigy 20 points
    Hi Dennis,
    The 0804MC being in vacuum completely, a vacuum like 10^-8 Torr. We have TO-3 headers and wirebond our chips to it, but then we want to use the 0804MC as the socket so that TO-3 headers can be interchanged quickly. I am wondering about the material of the 0804MC, is it made of some polymer that might outgas in vacuum? A seal is not necessary as the socket will be completely in a vacuum chamber.
    Please let me know.
    Thanks
    Girish
  • 0 in reply to Girish Rughoobur
    TI__Genius 11135 points
    Girish

    The socket is composed of glass filled polyester, and the contacts are brass with nickel/tin and nickel/gold plating. See data sheet here:
    www.ti.com/.../0804mc.pdf

    Unfortunately, outgassing is something we've never characterized, so I can't comment on the chemical properties.
    This is the only part of this type we offer so we don't have an alternate.

    Dennis


    If this answered your question please click the green "This Resolved My Issue" button.
  • 0 in reply to Dennis Goeke
    TI__Genius 11135 points
    Girish

    I haven't heard back from you so I assume this answered your question. Post another reply below if you have any additional questions about this part.

    Thanks
    Dennis