ISO120: Qualification questions for this part

user4345944

Part Number: ISO120

Hello,

I would like to know the applicable standard (for testing: AEC-Q101, JEDEC...) for the ISO120SG. Do you have ny reliability data to share? For example, life test, Thermal cycles, 85°C/85RH, HAST, and any other?

Do you also have any reliability figures in terms of FIT or MTBF?

And is there any obscolescence planned for this part?

Thanks very much in advance for your help.

Best Regards,

Annais E

over 6 years ago

0 Alexander Smith over 6 years ago

TI__Mastermind 49431 points

Hello Annais,

Thanks for your post.

Unfortunately, according to the E2E post below the ISO120 was designed in the 1980's and there is limited information about it's design.
e2e.ti.com/.../99640

All of the available quality and environmental information can be found under the "quality and packaging" tab on the product page: www.ti.com/.../pinout-quality

This part is not recommended for new designs.

Amplifiers

Amplifiers forum

ISO120: Qualification questions for this part