• State TI Thinks Resolved
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 817 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA111: 543765

user5758963
Prodigy 30 points
Part Number: INA111
Other Parts Discussed in Thread: OPA353

Hi E2E forum I have a question

We are students in Gachon University, South Korea.i introduce our experiment. It is a vibration experiment using ultrosound piezo actuator which can increase the stroke.

Other conditions are Gain Max Voltage is 1000, Bandwidth at Min Gain is higer than 1MHz.

There are 21 kinds of products which satisfy the need. I wonder which product best fits for our experiment. Also I'd like to know the differences between the products. 

I have read the products and I think we can  choose INA111, this device is appropriate for our experiment??

If INA111 is not available in this experiment, plz recommend other device for us.

  • 0
    Guru 140200 points
    Hi,

    you need a gain of 1000 and your signal has a bandwidth of 1MHz?

    Kai
  • 0 in reply to kai klaas69
    Prodigy 30 points

    yes we need  a gain of 1000 and our sign has a bandwidth of 1MHz

    INA111 is appropriate in our experiment?

    experiment needs changing stocks which can increase Voltage 1000

     

    If you have the other device which is better than INA111 in my experiment, plz recommend the other device.

  • 0 in reply to user5758963
    Guru 140200 points
    Hi,

    is there a special reason why you have chosen an Instrumentation Amplifier and not a standard OPAmp? Can you show us a schematic of your planned circuit?

    Kai
  • 0 in reply to kai klaas69
    Prodigy 30 points

    umm.. because we can`t find list of Gain Voltage in OPAmp...

    is it possible that OPAmp can receive the high Voltage(1000)?? and how can i see that information?

    and i have a big mistake..... all products are pcb package??..

  • 0 in reply to user5758963
    Guru 140200 points

    Hi,

    yes, of course, OPAmps can also provide very high gains and very high bandwidths. The benefit of an Instrumentation Amplifier is more the superior common-mode rejection. Or by other words, Instrumentation Amplifiers are used when a very high common-mode rejection is desired, which isn't the major purpose in an usual ultrosound piezo actuator application, right?

    So, look for an OPAmp with a very high bandwidth. In your application a OPA353 could be used, example given, which is a OPAmp with a bandwidth of 44MHz. But there are even much faster OPAmps. By cascading several such amplifiers you can easily increase the overall gain. For instance, cascading three amplifiers with a gain of 10 each gives a total gain of 1000.

    You wrote: "all products are pcb package??"

    What do you mean by that?

    Kai

  • 0 in reply to kai klaas69
    TI__Genius 11135 points
    Hyeon

    We haven't heard back from you so we assume this answered your questions.
    For additional information on OPAMPs, try reviewing our online training:
    training.ti.com/ti-precision-labs-op-amps
    Once you've reviewed these lessons if you have additional questions just post another reply below.

    Thanks
    Dennis