The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV2374: Lost gain in non-inverting stage

Part Number: TLV2374

I have designed a USB oscilloscope.

On the input I have a 1 meg resistor going into the non-inverting input of a unity gain non-inverting stage.

I was expecting to get out what was on the input of the 1 meg resistor but it is down about 50%.

The op amp input current is 1pA so I cant see that affecting my circuit.