LMV981-N: CDM and latch up current

lanjie Liu103016

Intellectual 820 points

Part Number: LMV981-N
Other Parts Discussed in Thread: TLV9001

Our customer need LMV981MFX ESD CDM level and CDM test standard ,AND latch current paremeter

I don't see the parameters in datasheet, where can I get the parameters or reference , thanks.

over 5 years ago

0 Paul Goedeke over 5 years ago

TI__Mastermind 30600 points

Hi Lanjie,

The CDM and latch-up current parameters were not tested for this device and are not included in the datasheet. If you need a similar device with specified CDM and HBM values, try the TLV9001.

Best,
Paul

0 Sanjeev Manandhar over 5 years ago

TI__Intellectual 775 points

HI Lanjie,

This device is about 20 years old and unfortunately, there is no data for CDM. If you provide some further information on your application and part requirement, I can help you find a part which does specify CDM in the datasheet and meet your requirement.

For the latch-up Current test (I-test) is at 200mA.

Regards,

Sanjeev

Amplifiers

Amplifiers forum

LMV981-N: CDM and latch up current