I have a question for LM393-N DSBA package(LM393TLX/NOPB).
The below is from Mechanical data in the datasheet.
Is there any mark on the top of the package to indicate BUMP A1 Corner?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The actual mark will differ depending on the assembly site (for former National devices).
Please see AN-1112, page 20
Some TI devices will have a "1" as the pin 1 mark.