OPA340: Operational test & studies

Leo Chow

Part Number: OPA340

Hi,

I'm planning to test out OPA340 (SOT23) using the DIYAMPEVM, may I know what functionality test I should take in order to better understand the device? Thanks.

Regards,

Leo

over 5 years ago

0 kai klaas69 over 5 years ago

Guru 140200 points

Hi Leo,

this depends on your application. I guess you already have a schematic of what you intend to build? Then, try to realize your circuit with this EVM.

Kai

0 Dennis Goeke over 5 years ago in reply to kai klaas69

TI__Genius 11135 points

Leo

It might be helpful to go through our Precision Labs training:
training.ti.com/ti-precision-labs-op-amps
This is an excellent primer for OPAMP circuit design.

Another helpful tool is our pspice simulator TINA TI:
http://www.ti.com/tool/tina-ti
With this you can test/refine your design before you commit to building the board.

Regards
Dennis

Amplifiers

Amplifiers forum

OPA340: Operational test & studies