This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THS4281EVM: This EVM seems to not have schematic attached.

Part Number: THS4281EVM
Other Parts Discussed in Thread: THS4281

Unlike other EVM, THS4281 seems to not have schematic attached.

This is too odd that there is no seperate EVM specification document. Instead, only a layout section in the datasheet is provided.

The EVM still lacks schematic and BOM information which usually can be easily found within other device's EVM specification.

By the way, the schematic shown in the first page of THS4281 datasheet looks wrong. The inverting and non-inverting inputs hooking on the sensing resistor's ends should be swapped.

Could you please help clarify these concerns.

Thanks a lot.