• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 374 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV3201-Q1: I have a question to absolute maximum rating for TLV3201-Q1.

Soichi Nishimura
Expert 4745 points
Part Number: TLV3201-Q1

Hi team,

I have a question about absolute maximum rating for TLV3201-Q1. 

This device has both of voltage and current range for input pins. Is it no issue when the current at input pin is less than 10mA even if the voltage at input pin is less than -10V?

Our customer uses resistor to limit input current less than 10mA. In this case, there is no impact even if the input voltage is out of maximum rating. Is it correct?

Regards,

Nishimura

  • 0
    TI__Expert 4555 points
    Nishimura-san,

    The voltage at the input pin will always clamp to your supply rails due to the ESD Diodes.

    As long as the current in this input signal is less than 10mA, you will not damage the part per footnote 2 in Table 7.1 of the datasheet.

    Regards,
    Jonny