This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA282: DC current measurement on Neutral Line

Part Number: INA282

Wondering if INA282 part can be used to measure DC current on Neutral line.   Our measurement range is 100mA to 500mA . But max current of 15A will run through sense resistor.

Please note that Power supply, MCU (with ADC) are referenced to Neutral line, so we basically want to measure current on low side.

Here is the block diagram of our design.