TLV2262A: esd rating needed

Vincenzo Pizzolante

Part Number: TLV2262A
Other Parts Discussed in Thread: TLV2262

hi,

we are facing some challenges w/ TLV2262A mostly related to ESD, so we were looking for the ESD rating of the part (no mention in datasheet).

may you help?

thansk a lot in advance

Vincenzo

over 5 years ago

0 Thomas Kuehl over 5 years ago

TI__Guru* 93105 points

Vincenzo,

I located a TI Qualification Report from 12/04/15 that provides the TLV2262ID ESD results. The testing shows it passed HBM at 3 kV (3/0, samples/fails) and CDM at 1.5 kV (3/0). The ESD performance will be the same for the TLV2262AID version.

Regards, Thomas

Precision Amplifiers Applications Engineering

0 Vincenzo Pizzolante over 5 years ago in reply to Thomas Kuehl

TI__Mastermind 24696 points

hi Thomas,

thanks. is any MM data available?

thansk a lot in advance

Vincenzo

0 Thomas Kuehl over 5 years ago in reply to Vincenzo Pizzolante

TI__Guru* 93105 points

Hello Vincenzo,

No, we do not have MM ESD info for the TLV2262. It is not common for TI to capture the MM ESD performance information any longer. The MM test is considered an obsolete measure of ESD performance, and has been superseded by the CDM test. The CDM test is certainly more ESD rigorous than the MM test, and it is apparently more representative of the particular handling ESD environment encountered in assembly.

Regards, Thomas

Precision Amplifiers Applications Engineering

Amplifiers

Amplifiers forum

TLV2262A: esd rating needed