The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA735: Voltageto-Current (V-I) Converter's feedback compensations

Part Number: OPA735
Other Parts Discussed in Thread: INA250

Hi Team,

 I recently read the article 1% Error, 0-5 V Input, 0-500 mA Output, Low-Side Voltageto-Current (V-I) Converter (SLAU501) and have some questions about the feedback components RF and CF.

For higher frequencies, CF providing feedback to the inverting input directly instead of at the BJT emitter through RF. the current path is as show below correct for high frequencies and the feedback coefficient is

Is this analysis correct? And how do the RF and CF actually work? I would appreciate it if you could help me. Thanks