ISO224EVM: ISO224

Dev Chandil

Part Number: ISO224EVM
Other Parts Discussed in Thread: ISO224

To measure a 10V input to Vin do I need to provide 10V to VDD1 of ISO224 or can we use a 5V supply as given in EVM module

over 4 years ago

0 Alexander Smith over 4 years ago

TI__Mastermind 47595 points

Hi Dev,

You can use a 5V supply as shown in the user's guide. Additionally, you can power VDD1 by applying 5V at the VDD2 terminal block and using the isolated transformer on the board.

Amplifiers

Amplifiers forum

ISO224EVM: ISO224