This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA317: SIngle supply operation with INA317 & shifting input signal to middle

Part Number: INA317
Other Parts Discussed in Thread: CC1310,

I have SM24 sensor whose output need to be amplified. Datasheet attached.

Ckt is battery operated & output is fed into TI's CC1310 adc. 

Will power the INA317 with 2.7V or 2.8V single supply operation. 

Will connect mid supply at vref to shift the signal to middle for output. But my input sensor can below the input voltage rail limits, how to level shift the signal here?