Can i get the output impidance od LMV321Q1M5
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Rony,
The open loop output impedance of the device is provided in Figure 43 of the datasheet.
Thank you,
Tim Claycomb
Dear Tim,
Thank you for your replay.
I just wanted to know the closed loop impedance which is negligibly small for an opamp.
Should i get actual impedence by dividing open loop impedance with loop gain?
Regards,
Ronie
Hi Rony,
The closed loop output impedance can be calculated by
Zo/(1+Aol*Beta)
where Zo is the open loop output impedance and Beta is the feedback factor. As you can see the closed loop output impedance is dependent on the open loop gain of the amplifier (Aol) and the closed loop gain.
Thank you,
Tim Claycomb
Hi Ronie,
yes, nearly. But divide the open loop impedance by (1 + loop gain) instead of (loop gain). Of course, for high loop gains (for instance at low frequencies) there will not be much difference...
Kai