• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 268 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LF353-N: Can LF-353 support single power supply?

Eddie Chou
Expert 4710 points
Part Number: LF353-N

Hi Team,

my customer plan use LF353-N with single power supply Vcc : +24 and Vee : GND.  

Can LF353-N support single power supply more than +18V?  and what is output current source and sink at that condition?

Thanks & Regards

Eddie

  • 0
    TI__Guru*** 140106 points

    Hello Eddie,

    The op amp doesn't know the difference between [-12V,12V] or [0V,24V].  Output current will be similar to +/-15V performance, Recommended minimum load is 2k ohms; this is how the device is tested in electrical characteristics tables. However figures 8 and 9 show typical output current data. Input and output range do not include ground in the same way that when using +/-15V they don't include -15V.