This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA4314: Amplifiers forum

Part Number: OPA4314

Hi team,

There is the following description in the data sheet though,  Is it okay to apply more than 0.5V at input pins under no supply condition if the current to the input pin is 10 mA or less?

My customer plan to use following circuit. Due to their power sequencing, 3.3V rail will be turned off earlier than 5V rail.

Regards,

Takashi Onawa