• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 51 subscribers
  • Views 290 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LPV511: Output swing low

Ashok R41
Intellectual 360 points
Part Number: LPV511

Hi,

I was referring to the LPV511 datasheet, output swing high is 100mV, with Positive rail supply 3V, 3 - 0.1 = 2.9V which looks correct. For output swing low its -100mV negative rail supply is 0. The output should be +100mV, but the unit mentioned is V. The unit is datasheet is the mistake or I am reading the datasheet wrong?

Regards

Ashok

  • 0
    Guru 140200 points

    Hi Ashok,

    yes, this is a typo. The unit should be "mV", as on top of page 7 and in the middle of page 8 of datasheet of LPV511.

    Kai

  • 0 in reply to kai klaas69
    Guru 47515 points

    Actually, there might be another interpretation, 

    The conditions talk about Vid being +100mV and in the output swing low lines -100mV. that actual Vo swing look correct and the conditions might be saying the diff input is +100mV to swing to positive rail and -100mV to force an open loop swing to close negative supply - with that interpretation, looks correct (but kind of odd, those NSM guys?)