This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV1805: Used for reverse current protection on low side

Part Number: TLV1805

Hi Team,

my customer wants to use the TLV1805 together with a N-Channel FET on the low side for reverse current protection. Is the TLV1805 working normally when on the voltage on the -IN pin is below the part GND? The current would be limited to 100uA but the part should not only survive this state but still behave normally in this condition.

Thank you for your support!

Best regards

Simon