Hi team,
I got question from my customer about failure mode.
Please see attached material.
Best regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
I got question from my customer about failure mode.
Please see attached material.
Best regards,
Nobuo,
At what node is C2 measured? IOUT or pin 5 or 6?
On the suspected failing units, are any input pins shorted to V- or V+?
Hi Nobuo,
hhm, R531=3k6 and R538=3k6 should limit the input current to a safe level: 4V / 3k6 = 1.1mA.
Kai