Hi,
LF442CN/NPOB Op Amp Dual Low Power Amplifier ±18V 8-Pin PDIP part is used in one of our old design, I'm looking for a Functional form fit replacement.
Please suggest me a replacement part to avoid layout changes.
Regards,
Venky
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Venky,
Here are some parts you may consider. They have similar or better bandwidth, maximum voltage offset, slew rate, supply current, and voltage noise specifications as the LF442CN. They are also +/-18V supply capable, like the LF442CN, and come in the PDIP package with the same pinout.
Please make sure to double-check specifications, pinout, and package dimensions with your original design to be sure. Let me know if you need anything else.
Regards,
Daniel
Hi Venkatesh,
Since I've not heard back from you in a while, I am going to assume that the help provided here was sufficient and that the list of provided parts was satisfactory.
Please, feel free to let us know if you need any further assistance.
Regards,
Daniel Miller