XTR111-2EVM: 0.5 to 4.5 volt input and 4 to 20 mA output verification and confirmation needed

Dear Sir, 

Many thanks for the suggestion, I could use the TINA simulator and changed some values of the schematic 

please see the attached  the changes  are  R 10 = 90 k,  V1= 3V (as this is internally set to 3V in XTR111),  added R1=10k, R2= 5k to get 4.5 volts at REGF

I could get the output of 4 mA to 20 mA with an input of  0.5 to 4.5 VDC , kindly verify and confirm this is correct

with best regards

K. Ganapathy

/cfs-file/__key/communityserver-discussions-components-files/14/5226.XTR111_5F00_0p5_2D00_4p5V_5F00_to_5F00_4_2D00_20mA-05072020.TSC