This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH6553: Feedback resistor selection

Part Number: LMH6553

Hello team,

The feedback resistor is recommended on the datasheet as below.

In case of increasing it to make a gain higher, what are the main concern and risk?
(I can guess the bandwidth will get lower. Could you advise if there are any critical things.)

Thanks in advance.


  • Table 1 and 2 on page 21 show fixed Rf vs gain, this does reduce the input R to go to higher gains, 

    If you want to just increase the feedback R to get higher gains that will work but bandlimit through the gain bandwidth product - with a slight change in phase due to the feedback pole to the input C moving down a bit as well - simulations should show all of that approximately. 

  • Hi Shinya,

    how much do you want to increase the feedback resistors?