This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

XTR116: XTR116 measuring problem

Part Number: XTR116

Hi ,

I created the circuit below :   

I can control between 16-20 ma normally.
On the DAC side, I can monitor that the voltage is between 0-4095.No problem. But I have never seen less than 16ma. And I can see  VCOMPLIANCE more than +7.5 V.

Where am I doing wrong. ?Thank you.