This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA126: Webench sensor design?

Part Number: INA126


Im building a load cell circuit. 

Im power it with 5-0V.

I dont have at the moment the C1 capacitor neither the Ref1004C-1.2 diode recommended in Figure 25, page 16 of the datasheet.  Legs 4 and 5 will be grounded.

Can I omit the use of Ref1004C-1.2, and connect directly to the 5V ground (0V)?