**Other Parts Discussed in Thread:**TLV9052, TLV9102, TINA-TI

I use Orcad Pspice i have down loaded TLV9052.cir and have tried to make a part and use the orcad tools as suggested by a Ti app note SLOA070 i get this error in Orcad when I try to use it in a design

INFO(ORPROBE-3183): Simulation running...

** Profile: "SCHEMATIC1-test1" [ X:\prerel\Gregg\SPICE_test\spice1\spice_test-1-PSpiceFiles\SCHEMATIC1\test1.sim ]

Reading and checking circuit

ERROR(ORPSIM-15108): Subcircuit VCCS_LIM_CLAW+_0 used by X_U10.XCLAWp is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_LIM_CLAW-_0 used by X_U10.XCLAWn is undefined

ERROR(ORPSIM-15108): Subcircuit VOS_DRIFT_0 used by X_U10.XU1 is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_LIM_2_0 used by X_U10.XVCCS_LIM_2 is undefined

ERROR(ORPSIM-15108): Subcircuit VOS_SRC_0 used by X_U10.XVOS_VCM is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_LIM_ZO_0 used by X_U10.XZo is undefined

ERROR(ORPSIM-15108): Subcircuit VNSE_0 used by X_U10.Xe_n is undefined

ERROR(ORPSIM-15108): Subcircuit FEMT_0 used by X_U10.Xi_nn is undefined

ERROR(ORPSIM-15108): Subcircuit FEMT_0 used by X_U10.Xi_np is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_LIM_1_0 used by X_U10.XVCCS_LIM_1 is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_LIMIT_IQ_0 used by X_U10.XIQp is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_LIMIT_IQ_0 used by X_U10.XIQn is undefined

ERROR(ORPSIM-15108): Subcircuit CLAMP_AMP_LO_0 used by X_U10.XCL_AMP is undefined

ERROR(ORPSIM-15108): Subcircuit CLAMP_AMP_HI_0 used by X_U10.XGR_AMP is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_LIM_GR_0 used by X_U10.XGR_SRC is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_LIM_4_0 used by X_U10.XCL_SRC is undefined

ERROR(ORPSIM-15108): Subcircuit CLAMP_AMP_LO_0 used by X_U10.XCLAW_AMP is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_LIM_3_0 used by X_U10.XCLAW_SRC is undefined

ERROR(ORPSIM-15108): Subcircuit OL_SENSE_0 used by X_U10.XOL_SENSE is undefined

ERROR(ORPSIM-15108): Subcircuit VCCS_EXT_LIM_0 used by X_U10.XVCM_CLAMP is undefined

Circuit has errors ... run aborted

See output file for details

INFO(ORPROBE-3188): Simulation aborted

any thoughts

I am using 17.420190latest build

have the same problem with TLV9102