• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 49 subscribers
  • Views 140 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV341A: phase reversal

Marcel Schildknecht
Prodigy 90 points
Part Number: TLV341A

Does the OpAmp exhibit phase reversal when the input signal is between (V+ -0.6V) and V+ ? (unity gain configuration)

  • 0
    TI__Guru*** 139906 points

    Marcel,

    One of two things could happen when input is greater than actual common mode range. 

    1. Output could jump up to VOH, output full high 
    2. Output could go to "actual common mode voltage" and go no higher 

    The outcome for each sample amplifier will be random but not a 50/50 chance. 
    Once the input voltage gets back into range, normal operation resumes.