• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 284 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA230 frequency response vs conversion time

Jon Hansson
Prodigy 10 points
Part Number: INA230


Hello,

I have question on Figure 2 in the INA230 datasheet with the frequency response.

Does the frequency response in figure 2 change if the conversion time is changed from the default 1.1ms or is independent of the conversion time settings of INA230.

Best Regards

Jon

  • 0
    TI__Mastermind 32395 points

    Hey Jon,

    Thanks for your question and welcome to the forum.

    The frequency response will change as the conversion time is programmed to a value different from the default of 1.1ms.

    Hope this helps. Post back with any more questions you may have.

    Best,

    Peter