• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 49 subscribers
  • Views 1291 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Shutdown mode in TLV34x

Daniel Naito
Prodigy 10 points
Other Parts Discussed in Thread: TLV341, TLV342S

When the TLV341 or the TLV342S go into shutdown mode, does the output go into a high impedance state?

  • 0
    TI__Guru*** 140126 points

    Hello Daniel Naito,

    The outputs are high resistance when in shutdown. The outputs will be off to an external DC or low frequency AC signal. I say this because there is an internal RC path back to the driver gates. So it is possible that the outputs will react to a high frequency applied to the output pin in shutdown. However, I have not verified this effect.

    Regards,
    Ron M.