• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 50 subscribers
  • Views 972 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM324: LM324 : Half Wave Precision Rectifier Works and Full Wave Not..

Karan123
Intellectual 510 points
Part Number: LM324
Other Parts Discussed in Thread: TINA-TI, , TLV9101, TIPD139

Hi,

I am trying to simulate the Full Wave Rectifier on TINA-TI. Only Half Wave Works Well but Full Wave Not .

I am attaching File . Please update me what i am doing wrong..

LM324_FULL_WAVE.TSC

--

Thanks..

Karan

  • 0
    Guru 244220 points

    These voltages go up to 9 V, which is too near the positive rail. Try if you get better results with a rail-to-rail opamp like the TLV9101.

    Anyway, in TIPD139, the input signal goes to the non-inverting input of the first opamp: