OPA2834: Transient simulation

d_zero

Genius 4660 points

Part Number: OPA2834
Other Parts Discussed in Thread: PSPICE-FOR-TI, TINA-TI

Hi all*

i'm trying to do a transient simulation but have convergence error.

Also i tried first to run the BIAS POINT simulation but it also ends with convergence problem.

( Note i was able to preform a DC sweep V2 simulation)

Simulation in PSpice for TI attached.

hv_sense_npn_opamp.zip

Best Regards,

David.

over 3 years ago

0 kai klaas69 over 3 years ago

Guru 140200 points

Hi David,

can you show a schematic?

Kai

0 Hasan Babiker31 over 3 years ago in reply to kai klaas69

TI__Genius 15555 points

Hello David,

Looking at the file, the issue here seems to be that this part is not yet available in the Pspice-for-TI library and has limited functionality when imported. Models from TI's portfolio are constantly being added. For now, you should be able to get this simulation working on TINA-TI or the full version of Pspice.

Best,

Hasan Babiker

Amplifiers

Amplifiers forum

OPA2834: Transient simulation