Other Parts Discussed in Thread: INA302
Hi team,
I plan to use this device to monitor VBAT current of automotive ECU.
In order to minimize system standby current, I plan to stop supplying VS to INA302-Q1 in Standby condition.
If VS=0V and 12V(VBAT) is applied to IN+/IN-, does Ib (input bias current) drawn from VBAT?
Or if VS=0V, IN+/IN- will be in High-Z?
Please advise how much current totally drawn from this device at VS=0V and IN+/IN-=12V.
regards,