• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 49 subscribers
  • Views 192 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA316-Q1: Pspice Issue

Wayne Liu
Expert 8605 points
Part Number: OPA316-Q1
Other Parts Discussed in Thread: OPA316

The OPA316 PSpice model cannot work with CST(A EMC relevant simulation tool), the reported error is as below, could you please help? My customer said there is no such issue with other suppliers' devices. Thanks

  • 0
    TI__Mastermind 22381 points

    Hello Wayne,

    I'm unfamiliar with the the CST simulation tool and I do not believe it is a software supported by us, however, I'll try to help as much as I can.

    Are the other supplier models the same format (.cir)? I believe it is not recognizing the model declaration because it is trying to interpret BB_SW as the model when that is the name of the component that is modeled after VSWITCH (this is seen by opening the .cir in a text editor and looking at the netlist)

    Best,
    Jerry