Hello
I would like to plot V/I characteristics of components on a populated PCB using INA260 along with additional voltage input measurement . Any help/guidance appreciated
Regards
Vijayan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello
I would like to plot V/I characteristics of components on a populated PCB using INA260 along with additional voltage input measurement . Any help/guidance appreciated
Regards
Vijayan
Hello Vijayan,
The only hardware/software available for this device is on the INA260EVM hardware page. Here you can find the INA260EVM hardware and software to communicate with the INA260EVM. You could connect the communication to your PCB.