HI,
In TINA TI, Is there a way to check how much power each component is taking in the simulation? Do I have to add new stimulus for that? Or can it just the same transient model to check the power consumed by different component.
Thank you,
HSG
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI,
In TINA TI, Is there a way to check how much power each component is taking in the simulation? Do I have to add new stimulus for that? Or can it just the same transient model to check the power consumed by different component.
Thank you,
HSG
Hello HSG,
Thank you for your inquiry about TINA. Since TINA is a DesignSoft/TINA program, questions are handled by using the DesignSoft support page: http://www.tina.com/technical-support/ .
The DesignSoft/TINA team is very helpful and this is the most direct way for TINA support. Please advise by Reply when the issue has been resolved.
Regards,
~Leonard